Most people don’t like to wash their parts. This is because they often find it a difficult and frustrating task. Many people consider the task of scrubbing the parts to take off the filths as a time-consuming work they would rather have someone else handle for them. This will also be your experience unless you have the luxury of using one of the best parts washer solvent tractor supply.
These products will be discussed extensively in this article. This will enable you to make a wise decision when it comes to purchasing one. However, you can be certain that your frustrating experiences with washing your parts are over. Any of the products discussed in this article will make you experience an admirable level of ease when taking off the filth on your parts.
Parts Washer Solvent and Cleaner review
Below are the pros and cons of the best parts washer solvent obtainable regardless of your budget:
01. Oil Eater Original 1 Gallon Degreaser
This product has been the source of the smile of so many people. It is specially formulated for effective performance. This is, without a doubt, the original formula that is super effective when it comes to cleaning industrial parts. It is a fast-acting degreaser that is superior to other similar products especially because it does not contain any acid.
It is quite rare to find an effective solvent with the whole formula based on water. It is hence eco-friendly and safe to use due to the ingredients used in formulating it. It is, however, important to note that it comes as a concentrate. Hence, in order to use it for a high-demand project, you will need to dilute it with water.
02. Torin Big Red Steel Cabinet Parts Washer
This phenomenal product is from the stable of Torin. Without a doubt, it is an epitome of the modern invention in the resolution of issues concerning the washing of parts. This is not your conventional electric liquid cleaner. This is an electric chamber that is designed to effectively remove dirt from your parts. It comes with a cabinet of compact steel washer parts.
There comes a cabinet of washer parts made of compact steel. The durability of this product is assured because the pump is sufficiently supported by high-quality steel. It is interesting to know that this product can be used in combination with other biodegradable mineral spirits and cleaners. However, it is more suitable for cleaning smaller gears like wheel bearings or carburetors.
03. B’laster 128-PWS Industrial Strength Parts Washer Solvent
This is the favorite parts washer solvent of many people. The reason for this is not difficult to discover. It is the perfect combination of effectiveness and affordability. It is formulated to cut through Motor Oils, Cutting Oil, and Grease without stress. The use of this great product from the stable of B’laster guarantees that your parts are residue Free
The safety of the use of this product is indeed outstanding. This is because it can be used to clean all metals. It is also safe for use for most painted surfaces and plastics. It is very suitable for warmer metal parts because it has a flashpoint of 145°F. It is, however, important to know that in spite of its effectiveness, it is only suitable for industrial, automotive parts.
04. Black Bull PPWASH20 Portable Parts Washer with 20 Gallon Capacity
There are only a few products that can compete with the effectiveness of this powerful cleaning agent. It is formulated to make cleaning parts a fun-filled activity rather than a difficult task it can become. It cleans off grime, grease, and oil from engine parts, carburetors, oil pans, and more. It is embedded with a fully enclosed electric pump that makes recirculation of fluid for quick parts washing possible.
It comes with steel construction as well as a sturdy basin needed to cut the deposits for metal gears. It is also embedded with a removable work shelf. This has an adjustable nozzle, which encourages better and convenient coverage.
05. Goplus 40 Gallon Automotive Parts Washer Cleaner Electric Solvent Pump Shelf Tank
This great product from Goplus is in a class of its own among parts washing agents. It is a part washer that has been designed to take care of heavy-duty washing. It offers unique stability and durability due to the carbon steel of high strength it is made of. It also has a powder-coated finish that makes it resist rust and corrosion with ease.
You can be guaranteed of investing in a parts washer with a long-last serving life-span when you buy this product. It is excellent for cleaning multi-sized parts because it is embedded with a 40-gallon load capacity. It is designed to be able to stand by itself, which further lends credence to its amazing stability.
06. CRC 05067 Parts Washer Solvent – 5 Gal
This product is a worthwhile investment. It is a cleaning solvent that ticks all the right boxes. It is a water based-formula that formulated to remove oil, grease, dirt, and other contaminants instantly. It is also a safe product that can be used on all metal parts, most painted surfaces and plastics. It is a biodegradable liquid which makes it safe for use for parts. It can be used extensively because it is formulated for the cleaning of automotive parts that are sensitive.
What is a parts washer?
Part washers are also referred to as parts cleaner in some quarters. There are various ways to describe a parts washer. However, it is essentially an important tool which is manufactured for the purpose of effective removal of junks or contaminants from a workpiece. These parts washers include grime, dirt, carbon, grease, oil, metal chips, and mold release agents, cutting fluids, corrosion, paint, and ink. They are used both domestically and for manufacturing processes. They have basically pressured washers, The best parts washer solvents are used in new manufacturing and remanufacturing processes to degrease, clean, and dry bulk loads of small or large parts.
Harbor freight parts washer exists; there are also heated parts washers that you can also use domestically to wash your parts. There are essentially three types of parts washer, which all have parts washer pump. They are Manual equipment, automated spray equipment, and automated immersion equipment. The manual equipment comprises a simple work station that provides a spray, brush, and immersion cleaning.
The combination of the chemical action of the solution, as well as mechanical action provided by the brush, is what gets the cleaning job done with this type of part washer. The automated spray machine is essentially a cabinet that is embedded with a lid. This lid is elevated such that it allows parts to be brought onto a rotating work basket. The items have a wash solution applied to them through spray bars from above and below the work basket. It requires the combination of both mechanical actions made possible by the sprays and chemical action of the solution to achieve cleaning.
The third type of parts washer is the automated immersion equipment. This is essentially an open tank that is embedded with a lift-lid. This lift-lid allows the work to be introduced for the purpose of cleaning. The tank contains the wash solution. A pneumatically operated platform is located above the solution that workloads are introduced into. Once the process begins, the workload gets lowered into the solution. They are then agitated up and down to offer the requisite mechanical support to the chemical action provided by the solution. It is important to note that the wash solution for both the automated immersion equipment and the automated spray machine can be heated to make the cleaning more effective.
Read More :
- Review of the Best car air freshener for smokers
- Why do you need to have the best oil filter wrench?
- Most Important Car Maintenance Tips for A Car
Features and Benefits of parts washer solvent
Parts washer solvents are commonly used by various people because of the amazing features and benefits they offer. One such feature is the ability to effectively clean off contaminants. Contaminants such as grime, dirt, carbon, grease, oil, metal chips, and mold release agents, cutting fluids, corrosion, paint, and ink cannot stand the cleaning power of parts washer solvents. Parts washer solvents can remove these contaminants from your parts such as fasteners, automotive assemblies, wind turbine gearboxes, rail bearings, diesel engine blocks, nuts, bolts, and screws.
The mechanical method of scrubbing, which is often frustrating and burdensome, also belongs to the history books when you get a parts washer solvent. There are parts washer solvents that can effectively clean smaller parts, and there are also those that can be used to handle heavy-duty jobs. Hence, irrespective of your cleaning need, there is always a parts washer solvent that is suitable for you.
The durability and stability of most parts washer solvents is also another outstanding feature they possess. In other words, they are often designed to be used for long term purposes. Hence, once you purchase one of these products, you don’t have to think about investing in another one any time soon. They are often designed to offer the kind of support that makes their use very easy.
You don’t have to be sophisticated in engineering before you can make use of a parts washer solvent. However, it is important to note that this might not be the case when you buy an inferior quality parts washer solvent. In order to enjoy the features of parts washer solvents, you should ensure you buy a product that will be worth your investment. You don’t have to search too far; the best ones available in the market have already been examined in this article.
Advantages of cleaning with solvents instead of water
You don’t have to go through the considerable stress that comes with washing your parts with just water. Water can be a little effective, but it is too limited. Most filths attached to your parts are such that they require chemical actions acting on them before they can be removed. Solvents are special formulas that are formulated to remove these filths through the process of the chemical reaction. In case your fear is that these chemical reactions might cause damage to your parts, there is no cause for alarm. Only inferior quality solvents can cause such damages.
The best solvents are formulated with ingredients that make them eco-friendly. Hence, they carry out the task of removing grime and dirt from your parts without causing any form of damage. It is, however, important to understand that this ability is not found in all solvents. It is only the best solvents that are formulated with the twin effect of effectiveness and safety. You don’t have to worry about how much these solvents cost. Most of them are available at very affordable rates. Hence, there is no excuse to go through the stress of washing your parts with water when you have access to solvents.
How to clean parts washer solvent
Every parts washer solvent requires proper maintenance culture in order to keep it functional for the long haul. Whether what you have is a homemade parts washer solvent or a readymade one, you will need to learn to clean them properly in order to continue to enjoy using them. Solvent-based parts washer are often cleaned by removing and replenishing the used solvent. Generally, cleaning the washer involves some removal and tearing down that can be a little tedious.
Another method of improving the cleaning results of a part washer is by increasing the temperature. An increase in temperature doubles the chemical reaction of the detergent. It is important to note that you should not add water without adding an adequate amount of soap; this will affect the performance of the washer in the long run. You should endeavor to consistently clean out your tank. This should be done by checking for sludge, which should be disposed of properly. The solvent is contaminated by grease when used continuously; hence, it is important to do this as much as possible.
Furthermore, you should ensure that your door or lid is shut when you are not using it. The closure of the lid will ensure that you slowly lose moisture and gain oxygen. Failure to close it will make it gain oxygen rapidly which will lead to the corrosion of the metals. It is true that the covers are not submerged in water, but water is splashed on them anyway. Hence, it is important to keep the lid shut when not in use. In case you need further clarification on how to clean Blaster parts washer solvent, you can watch this YouTube video
Aqueous Parts Cleaner vs Solvent Parts Washer
There are often debates about the parts washer that can be regarded as the best between aqueous parts cleaners and solvent parts washers. They both have their advantages and disadvantages. A solvent parts washer is typically filled with several gallons of solvent. This solvent is stored in a settling pan at the bottom of the washer. A solvent parts washer is often avoided by some people because they have the tendency to be highly volatile. The import of this is that they can ignite easily. However, it is not all gloom and doom, this can be prevented by utilizing the lead fusible link that opens the large cover. The lead gets melted while the cover is slammed shut in case of fire.
Aqueous Parts Cleaner can be described as a large dishwasher that uses the combination of water and detergent with heat as well as mechanical energy to get the cleaning work done. Aqueous cleaners often require heating actions to improve their efficiency. There is no doubt that this makes them often more effective than solvent parts washers. However, the heat generated can make the cleaning process quite tedious than the solvent-based washers.
Things to consider before buying parts washer and Solvent
Before investing in a parts washer and solvent, there are important things you need to consider. The first thing to consider is the GPM of the pump. This refers to the gallons per minute pumped. Usually, the horsepower of the pump is often quoted rather than the GPM, it is however very important. The horsepower is not a true indicator of the performance of a parts washer, it is the GPM.
You Can find a pump with 5 horsepower with 45 GPM, while a pump with one horsepower may have 100 GPM. Parts washers depend on pressure and not a volume for effective cleaning. Hence, endeavor to check this detail before investing in the product. The second thing you should consider is the heat produced by the product you intend to buy.
A moderate level of heat is important to bring about effective cleaning performance. Hence, it is important to look out for a parts washer that can produce and sustain between 170-175 degrees of heat daily. The right side of the reservoir is also important. Large capacity reservoirs are more of liabilities rather than assets. You will require a large amount of heat to make them work effectively.
Hence, they are better avoided. You should also look out for parts washers that can be easily cleaned. A regularly scheduled cleaning program is important to ensure that the part washer is maintained and its efficiency retained. Also, you should not consider a washer whose replacement parts are difficult to get. Such products will become useless in case any of their parts develops a problem.
You should also consider simplicity when it comes to design. A parts washer whose control system is difficult to handle is not worthwhile. This will make it difficult for you to operate the parts washer effectively. Once the primary purpose of purchasing a parts washer is defeated, it is pointless to purchase it.
The simpler, the better. Don’t be carried away by the aesthetic quality of the product. Beauty never gets your pasts cleaned! The effectiveness of the product you are purchasing should be of utmost importance to you. Hence, you cannot afford to purchase a product you will find difficult to operate. Finally, it is also important to read reviews in order to be able to get a good grasp of the best products available in the market.
Parts Washer Solvent and Cleaner FAQ’S
Question: What is used in a parts washer?
Ans: Solvents are used in a parts washer. They are either solvent-based or water-based. Solvent-based cleaners contain a solvent that can dissolve two or more cleaning agents, which creates a homogenous formulation. Aqueous-based cleaners, on the other hand, utilize water in the dissolution of an application of detergent. They often require heating in order to work effectively. Most of them use a power wash process or jet spray in the cleaning process.
Question: What is the Safety Kleen solvent?
Ans: These are solvents that are used for degreasing and cleaning metal parts. They are petroleum distillates that are also referred to as “mineral spirits.” They are formulated to get the job done without causing any form of damage to your parts. That is why they are often recommended for cleaning jobs. Cleaning is less tedious with these solvents. This is why they are often described as solvents that are on a class of their own.
Question: What solvent is used in a parts washer?
Ans: Only solvents that are suitable, effective, affordable, and safe should be considered for any parts washer. The solvents that have been examined in this article excels in these attributes. Suitability is key because every solvent is not the same. To decrease and clean parts, kerosene, diesel fuel, gasoline, and Stoddard solvent were being used before. However, recently, what became the industry standard is the chlorinated solvents in vapor degreasers. It is also important that you go for solvents that are environmentally friendly.
Question: Is parts washer solvent flammable?
Ans: It is true that there is the risk of part washer solvent to be flammable. However, this is more of an exception rather than the rule. In case of such unpleasant events, there are preventive measures made possible by the design of these washers. The lid of the cover has to lead a fusible link to curb this.
Question: What is the best solvent to use in a parts washer?
Ans: All the solvents that have been reviewed in this article can be called upon to do a good job. There are three important characteristics that should be possessed by every quality solvent. These qualities include effectiveness, affordability, and safety. A solvent that rates low on these qualities is not worth your investment. Interestingly, the solvents that were reviewed in this article rates high on these qualities. Hence, you can rest assured that you are making the right choice by purchasing any of these products.
This YouTube Video will also be helpful in order to aid your resolve to clean your parts washer solvent effectively.
Wondering how to clean your tools? Both your tools and engine parts can be cleaned right there in your garage without going to a repair shop or requiring the services of a mechanic. Your old spare parts will become shining and cool again. Ensure you get this done by getting only the best products available in the market.
Learn More :